Home → DL pro → Printer Friendly Version
The laser diode in the DL pro is secured with special circuitry that disconnects the laser diode if the supply voltage drops below a certain threshold. The connection between laser diode and driver is not automatically re-established on the supply voltage is present again.
The DL pro is user serviceable to a certain extent. In order to guide you towards locating and solving the most common problems we are making a troubleshooting workflow diagram available for download.
Before you start
These troubleshooting guides represent only a coarse outline of the steps necessary to get the laser system back to its specification. They do only complement, not replace the user manuals.
Before taking any of the following steps the user must familiarize himself with the hazards involved when mainting a laser source. READ AND FOLLOW THE SAFETY INSTRUCTIONS AND WARNINGS in the user manual carefully before you proceed. TOPTICA can not held be liable for injuries and / or damages caused by improper use of its lasers. If you feel unsure, please contact TOPTICA's service department first. Proceed at your own risk!
