1.1. Remote control

The SC 110 can be remotely controlled in two different ways:

1. Via the back plane of the Dc 100 supply rack. By default, the SC 110 is not configured for remote control, unless the SC 110 is part of a laser system that includes a devices that is designed to control the SC 110, for example the Digilock. In order to enable the SC 110 for remote control, the position of jumpers or DIP switches (depending on the version / age of the SC 110) needs to be changed (see user manual).
2. SC 110 modules purchased 2006 or later also accept remote input through the external trigger BNC on the front panel. This feature is not documented in older manula revisons but the information can be made available on request.

Both options can be used simultaneously, so it is possible to remotley control the SC 100 from two independent sources.