- Support
- >
- DLC pro
- >
- FAQ
- >
- Is there a trigger output available, so I can synchronize external devices with the DLC pro?
1.1. Is there a trigger output available, so I can synchronize external devices with the DLC pro?
Yes, indeed!
There is a digital I/O connector at the rear of the MC/MC+ module of the DLCpro that can be used to obtain, for example, trigger signals for the piezo scan (DLpro or CTL) or the motor scan (for the CTL laser).
More information can be found in chapter 9.2.3 / 9.2.4 of the DLCpro user manual.
This page was: Helpful |
Not Helpful