HomeFemtoFiber smartPrinter Friendly Version

FemtoFiber smart

PicoFyb, FemtoFyb, FemtoFerb

1. FAQ

1.1. Switchbox: Interlock configuration

By default, the interlock connector of the switchbox is shorted by an internal jumper (JP3)

 

This means that the laser can be operated right out of the box with no additional wiring.

If external interlock functionality is desired, JP3 can be removed:

  1. Pry off the plastic caps at the rear side of the switchbox using a thin blade
  2. Remove the screws (Torx T10)
  3. Slide open the switchbox  
  4. Remove jumper JP 3